#111 -Designed specifically for hand-cutting. Panels can
be replaced accurately and easily. Superior shape carving. Easier cutting means less wear on instruments. White release liner removes easily. Use with Intertape®/Anchor Filler #211. |
 |
|
#116 -A high-tack computer stencil for use on raw wood surfaces and urethane foamboard. 15" features trimmed edges and a strong, clear film liner that offers easy alignment and smooth, precise running on computerized sign-making machines. The 30" width tracks only on large pin plotters and the stencil rubber extends to the edge of liner. CAUTION: #116 has a very aggressive adhesive and is not recommended for use on some woods without first testing a sample piece. Do not use on prepainted, pretreated or glass surfaces.
|
#117 -Designed for use with computerized cutting machines.
Trimmed edges on 15" roll allows smooth and easy tracking through the machine.
A strong, clear film liner provides extra rigidity. The 15" width will track through
most computer cutters. The 30" width will track only through a large pin plotter and the stencil rubber extends to the edge of liner. After letters and designs are cut, they must be taped for transferring the stencil to stone. Use with Intertape®/Anchor Filler #211.
|
#120 A multi-purpose, medium-tack stencil designed for shape and depth carving in glass and pretreated, prepainted or soft woods. Extremely easy to hand-cut. Dark blue release liner lifts away easily. Stencil holds securely during blasting. No fillers are required, saving time on application and cleanup. #120 can also be used on tile, pretreated urethane foamboard and plexiglass. Size available: 25" width only.
|
#124 –Same construction as #123. 2-mil polyester film holds letters and designs in place while transferring from computer to die. The holes are punched through the liner and rubber. Available in a 15" width/10 yard length, and a 30" width in both 10 and 20 yard lengths. Use with Intertape®/Anchor filler #223 or #333. Note: 30" width will work with large pin 30" plotters.
|
#125 -A high-tack stencil designed for sandblasting on raw wood and urethane foamboard. Easy-release orange liner. The strength of the adhesive eliminates the need for filler or spray adhesives. CAUTION: This stencil has a very aggressive adhesive and is not recommended for use on some woods without first testing a sample piece. Do not use on prepainted, pretreated or glass surfaces. Size available: 25" width only.
|
#128 -This 18-mil hand cut stencil is designed for glass etching, and can also be used on light stone, tile, and acrylic etching. The paper liner removes easily. Has a petroleum-based adhesive system and conforms nicely to curved or irregular surfaces. Available in 25" and 30" widths. All rolls are 10 yards in length. Use with Intertape®/Anchor Filler #211.
|
#153 -For use on friction-fed cutters. Can be used safely on pretreated and prepainted wood, urethane foamboard, glass, tile and acrylic. Rubber is trimmed back 1/2" along each edge so the wheels can clamp down on the 5-mil polyester film liner and carry the stencil through the computer. Since this type of plotter has no sprockets, holes are unnecessary (as in other computer stencils). Sizes available: 19-7/8" and 24" widths
|
#155 -Same construction as #153 stencil, except this product has a water-based acrylic adhesive, rather than petroleum-based. Adhesion level is much higher than #153. Rubber is trimmed back 1/2" along each edge so the wheels can clamp down on the 5-mil polyester film liner and carry the stencil through the computer. Used on raw wood and urethane foamboard. CAUTION: #155 has a very aggressive adhesive and is not recommended for use on some woods without first testing a sample piece. Do not use on prepainted, pretreated or glass surfaces. Available in 197⁄8" and 24" widths.
|
#156 -Same construction as our high-tack #116 computer stencil, except that the hole pattern is for use on standard
1/2" on center sprocket machines and edges are trimmed.
Available in 30" width. CAUTION: #156 has a very aggressive adhesive and is not recommended for use on some woods without first testing a sample piece. Do not use on prepainted, pretreated or glass surfaces. Note: #156 will not work on the large pin 30" plotter; Style #116 is recommended for this use.
|
Blastlite -Medium-tack BlastLite™ is a specially-
formulated rubber mask that is long-lasting and easy to use.
Natural flexibility properties and impact resistance make it ideal for use on all substrates where shallow blasting is required. BlastLite™ Medium-tack Stencils are designed for primed and painted surfaces, glass, plastics, synthetic stone and glazed tile. Available unpunched or friction fed.
|
